This course will give you hands-on FPGA design experience that uses all the concepts and skills you have developed up to now. You will need to purchase a DE10-Lite development kit. You will setup and test the MAX10 DE10-Lite board using the FPGA design tool Quartus Prime and the System Builder.
FPGA Capstone: Building FPGA Projects
Give your career the gift of Coursera Plus with $160 off, billed annually. Save today.
FPGA Capstone: Building FPGA Projects
This course is part of FPGA Design for Embedded Systems Specialization
Instructor: Timothy Scherr
7,511 already enrolled
Included with 
Gain insight into a topic and learn the fundamentals.
4.3
(23 reviews)
Intermediate level
Recommended experience
Flexible schedule
Approx. 29 hours
Learn at your own pace
Build toward a degree
What you'll learn
Create a working FPGA design using Quartus Prime and run it on an evaluation board
Understand and practice all aspects of FPGA development, including conception, design, implementation, and debugging.
Create in the FPGA a working system on a chip design with Nios II soft processor, RAM and FLASH memory, and several peripherals.
Become familiar with the FGPA development flow, particularly in the case of a SoC with software development flow included.
Skills you'll gain
Details to know
Shareable certificate
Add to your LinkedIn profile
Assessments
4 quizzes
Taught in English
See how employees at top companies are mastering in-demand skills
Build your subject-matter expertise
This course is part of the FPGA Design for Embedded Systems Specialization
When you enroll in this course, you'll also be enrolled in this Specialization.
- Learn new concepts from industry experts
- Gain a foundational understanding of a subject or tool
- Develop job-relevant skills with hands-on projects
- Earn a shareable career certificate
Earn a career certificate
Add this credential to your LinkedIn profile, resume, or CV
Share it on social media and in your performance review
There are 4 modules in this course
In this module you will begin your hands-on exploration of FPGA design by setting up a target board, the DE10-Lite based on the MAX10 Intel Altera FPGA. In this module you will Setup and test the MAX10 board using the FPGA design tool Quartus Prime and the System Builder. Design and test a Binary Coded Decimal Adder Record all your observations in a lab notebook pdf. Submit your project files and lab notebook for grading. Completing this module will help prepare you for the work to be done in the modules that follow.
What's included
5 videos4 readings1 quiz6 programming assignments1 peer review1 discussion prompt
The goal of this module is to develop a mixed-signal system. You will construct hardware that uses the Analog to Digital Converter (ADC) inputs and Pulse Width Modulate (PWM) outputs to make a voltage measuring instrument. In this module you will Create a working design, using most aspects of the Quartus Prime Design Flow. Design and test a PWM Circuit, with verification by simulation. Design and test an ADC circuit, using Quartus Prime built-in tools to verify your circuit design. Record all your observations in a lab notebook pdf. Submit your project files and lab notebook for grading. Completing this module will help prepare you for the work to be done in the modules that follow.
What's included
2 videos1 reading1 quiz2 programming assignments1 peer review
The goal of this module is to develop the hardware for a System on a Chip (SoC). You will construct hardware that creates a NIOS II soft processor along with several interfaces to devices on the DE10-Lite development kit. In this module you will Create a working design, using most aspects of the Quartus Prime Design Flow. Create hardware for the NIOS II soft processor, including many interfaces, using Qsys (Platform Builder). Instantiate this design into a top-level DE10-Lite HDL file. Compile your completed hardware using Quartus Prime. Record all your observations in a lab notebook. Submit your project files and lab notebook for grading. Completing this module will provide a platform for the work to be done in the module that follows.
What's included
2 videos1 reading1 quiz1 programming assignment1 peer review
The goal of this module is to develop the software for a System on a Chip (SoC). You will build software for a NIOS II soft processor you built in Module 3, using several interfaces to devices on the DE10-Lite development kit as well. In this module you will Enhance and test a working design, using most aspects of the Quartus Prime Design Flow and the NIOS II Software Build Tools (SBT) for Eclipse. Create software for the NIOS II soft processor, including many interfaces, using Qsys (Platform Builder) and the SBT. Compile your completed software using the SBT. Use Quartus Prime to program both the FPGA hardware configuration and software code in you DE10-Lite development kit. You will then test your new embedded system. Record all your observations in a lab notebook pdf. Submit your project files and lab notebook for grading. Completing this module will finish your work for this course.
What's included
2 videos1 reading1 quiz1 programming assignment1 peer review
Instructor
Instructor ratings
4.8 (10 ratings)Offered by
Recommended if you're interested in Electrical Engineering
University of California San Diego
Build toward a degree
This course is part of the following degree program(s) offered by University of Colorado Boulder. If you are admitted and enroll, your completed coursework may count toward your degree learning and your progress can transfer with you.¹
Why people choose Coursera for their career
Felipe M.
Learner since 2018
"To be able to take courses at my own pace and rhythm has been an amazing experience. I can learn whenever it fits my schedule and mood."
Jennifer J.
Learner since 2020
"I directly applied the concepts and skills I learned from my courses to an exciting new project at work."
Larry W.
Learner since 2021
"When I need courses on topics that my university doesn't offer, Coursera is one of the best places to go."
Chaitanya A.
"Learning isn't just about being better at your job: it's so much more than that. Coursera allows me to learn without limits."
Learner reviews
Showing 3 of 23
4.3
23 reviews
- 5 stars
65.21%
- 4 stars
17.39%
- 3 stars
4.34%
- 2 stars
4.34%
- 1 star
8.69%
Open new doors with Coursera Plus
Unlimited access to 7,000+ world-class courses, hands-on projects, and job-ready certificate programs - all included in your subscription
Advance your career with an online degree
Earn a degree from world-class universities - 100% online
Join over 3,400 global companies that choose Coursera for Business
Upskill your employees to excel in the digital economy
Frequently asked questions
Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:
The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.
The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.
When you enroll in the course, you get access to all of the courses in the Specialization, and you earn a certificate when you complete the work. Your electronic Certificate will be added to your Accomplishments page - from there, you can print your Certificate or add it to your LinkedIn profile. If you only want to read and view the course content, you can audit the course for free.
If you subscribed, you get a 7-day free trial during which you can cancel at no penalty. After that, we don’t give refunds, but you can cancel your subscription at any time. See our full refund policy.