Chevron Left
Back to Motors and Motor Control Circuits

Learner Reviews & Feedback for Motors and Motor Control Circuits by University of Colorado Boulder

4.7
stars
1,365 ratings

About the Course

This course can also be taken for academic credit as ECEA 5341, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our second course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This second course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers for the above table, the lab on Motor Voltage and Current Measurement. You can copy and paste them into the search engine on the Digikey web site. You need one of each except for the AA batteries (N107-ND), which you would need 3. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

Top reviews

AC

Jul 9, 2020

This course and lectures deliver what is promised: about AC and DC motor.

If you are looking to learn about this subject, this is one of the best online class that you can find.

Happy learning!

RE

Apr 9, 2020

The course has given me a brief idea about how to choose a motor for my application. Real time application videos and laboratory exercises which really enhances the knowledge about AC and DC Motors.

Filter by:

26 - 50 of 368 Reviews for Motors and Motor Control Circuits

By Vaghela H

Jul 10, 2020

It was a good course about motor and motor control circuit, I have learn lot from this course.

By RAJAS P T

Apr 27, 2020

Teaching........applications of EE Engineering by simple involvement methods

By D O

Oct 2, 2020

pls provide Certificate professor

By josh K

Mar 11, 2021

I must have missed the part on having a great handle on how to use a PSoC creator and some programming. Wish when we got to the lab portion had more videos and understanding of how it works. I like the rest of the class.

By Wahyu G

Mar 27, 2020

Doesn't go as I expected. I though it is going to be so much theoretical and turns out to be practical, and not go into details (but go into necessary details for professional engineer, not academia)

By Nischal D

Oct 7, 2020

Too much of reading which makes the experience a little boring and hard to finish in the given 1 week time span.

By Alessandro F

Jan 22, 2023

The course deals with both AC and DC motors, although it's more focused on the latter category. The teaching method is not ideal (only static slides, no animations of motor working principles): I suggest to watch videos on YouTube channels "The Engineering Mindset" and "Lesics" for better understanding. The quizzes are of intermediate difficulty and the course can be completed even without purchasing lab equipment (there are instructions to build your own circuit and do some experiments, if you want). Overall, I think this is not a bad course, but there's room for improvement.

By Milad M

Dec 31, 2021

The reading assignments were absolutely amazing to get better understanding of the content, presented by the instructors and it shows that the instructors know how help you to learn what you came for.

and it was good a point that you learn some practical stuffs through some lab instructions. I was amazed for this part of the course before even I started it.

The course was PERFECT

And Thanks Coursera for providing such a great course.

By Jordan I C T

Sep 30, 2021

El curso tiene mucha información valiosa, necesaria y de suma importancia, me sirve de mucho lo que aprendí pondré todo el conocimiento adquirido en práctica y en mi vida diaria eso es lo que puedo decir de Motor and Motor Control Circuits.

By Hamidreza D

May 15, 2023

Great Course about Electric Machines!!!!!!!!! this course covered all aspects of Electrical machines principles and conventional types of motors that can be use in industrial applications. Thanks and Best Kinds.

By Shreyas P

Mar 22, 2022

excellent course gained so much knowledge related to motor control system.instructor was too good,as his aproach towards explaining the topics are really apreciable.

By Sanjit D

Aug 16, 2021

Good Course, covers practical aspects of the motors and their controls, basic knowledge in Electrical Machines and Electrical Networks are the pre-requisites.

By Kasuntha M

Nov 16, 2020

Great course to learn about Motors and Motor Control Circuits in detail. i highly recommend this and thanks for all the people who supported in this course.

By SALIM B

Nov 20, 2022

The way as instructor lecturing was amazing

Recommended for Electrical Engineers who wants to upgrade their knowledge about the different types of Motors

By P. K

Nov 8, 2022

Excellent program to under stand the Motors and Motor control circuits and it will improve additional knowledge

By ALFONSO G

Dec 27, 2020

Excellent course, you can learn many specifications, how electric motors work and the way they are controlled.

By Ivan L

Oct 19, 2021

Great practical knowledge I would recommend it if you are interested in Motors and Motor control circuits.

By YASHAVANTHA D

Mar 29, 2021

I think it is the good opportunity to study the motors and motor control circuit

Thank you so much

By Sanjeev G

Sep 22, 2020

Short and concise lectures, covering everything from operation, specs, teardown of actual motors.

By Sivaramaganesh S

Sep 3, 2021

A very good course, which gave me knowledge on a vast subject in a short span of time.

By Priyanga M

Jan 10, 2021

This is the best course for identifying AC and DC motor processes and configurations.

By Mohamed A

Nov 25, 2022

more information I learned in this courses helpful for my life and education

By Thirupathi R G

Mar 20, 2021

Grest course I have learned new things about this course.thank you coursera

By NICK B

Jul 13, 2021

un curso demasiado bueno para los ingenieros de control i los de potencia

By Anurodh K

Nov 11, 2022

It is very easy to learn here. And it is taught in a very good way here.