Politecnico di Milano
FPGA computing systems: Partial Dynamic Reconfiguration
Politecnico di Milano

FPGA computing systems: Partial Dynamic Reconfiguration

1,540 already enrolled

Included with Coursera Plus

Gain insight into a topic and learn the fundamentals.
Beginner level

Recommended experience

27 hours to complete
3 weeks at 9 hours a week
Flexible schedule
Learn at your own pace
Gain insight into a topic and learn the fundamentals.
Beginner level

Recommended experience

27 hours to complete
3 weeks at 9 hours a week
Flexible schedule
Learn at your own pace

What you'll learn

  • You will learn to name the 5 Ws with respect to a reconfigurable hardware context

  • You will learn which techniques can be used to deal with the overhead introduced by the Partial Dynamic Reconfiguration

  • You will compare different flows to realize a reconfigurable system and you will explain the phases composing a design flow for FPGA-based system.

  • You will understand the reason of moving towards reconfigurable cloud solutions and moving from a single FPGA-based system to a distributed scenario

Details to know

Shareable certificate

Add to your LinkedIn profile

Assessments

8 assignments

Taught in English

See how employees at top companies are mastering in-demand skills

Placeholder
Placeholder

Earn a career certificate

Add this credential to your LinkedIn profile, resume, or CV

Share it on social media and in your performance review

Placeholder

There are 4 modules in this course

Before continuing in this terrific journey in the reconfigurable computing area, it can be useful to define a common language. Obviously, some of these terms have been already used but it is now time to better understand them and to make some order before continuing with more advanced concepts. Furthermore, as we know, FPGA configuration capabilities allow a great flexibility in hardware design and, as a consequence, they make it possible to create a vast number of different reconfigurable systems. These can vary from systems composed of custom boards with FPGAs, often connected to a standard PC or workstation, to standalone systems including reconfigurable logic and General Purpose Processors, to System-on-Chip's, completely implemented within a single FPGA mounted on a board, with only few physical components for I/O interfacing. There are different models of reconfiguration, and a scheme to classify them is presented in this module. We can consider this module as a transitional/turning point module. We have been exposed to some terminology and concepts and we are now ready to move forward. To do this, we need to combine all the pieces of the puzzles together and to invest a bit at looking at the overall picture, and this is exactly what this module has been designed for.

What's included

6 videos2 readings2 assignments

The reconfiguration capabilities of FPGAs give the designers extended flexibility in terms of hardware maintainability. FPGAs can change the hardware functionalities mapped on them by taking the application offline, downloading a new configuration on the FPGA (and possibly new software for the processor, if any) and rebooting the system. Reconfiguration in this case is a process independent of the execution of the application. A different approach is the one that considers reconfiguration of the FPGA as part of the application itself, giving it the capability of adapting the hardware configured on the chip resources according to the needs of a particular situation during the execution time. In this case we are referring to this reconfiguration as dynamic reconfiguration and the reconfiguration process is seen as part of the application execution, and not as a stage prior to it. This module illustrates a particular technique, which is extending the previous two, that has been viable for most recent FPGA devices, Partial Dynamic Reconfiguration. To fully understand what this technique is, the concepts of reconfigurable computing, static and dynamic reconfiguration, and the taxonomy of dynamic reconfiguration itself must be analyzed. In this way partial dynamic reconfiguration can be correctly placed in the set of system development techniques that it is possible to implement on a modern FPGA chip.

What's included

8 videos4 readings2 assignments

After presenting different solutions proposed to design and implement dynamic reconfigurable systems, this module will describe a general and complete design methodology that can be followed as a guideline for designing reconfigurable computing systems. To design and implement a reconfigurable computing system, designers need Computer-Aided Design (CAD) tools for system design and implementation, such as a design analysis tool for architecture design, a synthesis tool for hardware construction, a simulator for hardware behavior simulation, and a placement and routing tool for circuit layout. We may build these tools ourselves or we can also use commercial tools and platforms for reconfigurable system design. The first choice implies a considerable investment in terms of both time and effort to build a specific and optimized solution for the given problem, while the second one allows the re-use of knowledge, cores, and software to reach a good solution to the same problem more rapidly. This module is guiding the students through an historical view on how CAD frameworks evolved through the years. This is done to show how fast the technology is evolving and the rationale behind the choice made to improve the users experience when working with an FPGA-based system. Not only commercial tools are described, but also the personal journey done by the course instructor and his research team, starting from his early days as a PhD up to the research challenges they are nowadays working on.

What's included

9 videos7 readings3 assignments

We are working at the edge of the research in the area of reconfigurable computing. FPGA technologies are not used only as standalone solutions/platforms but are now included into cloud infrastructures. They are now used both to accelerate infrastructure/backend computations and exposed as-a-Service that can be used by anyone. Within this context we are facing the definition of new research opportunities and technologies improvements and the time cannot be better under this perspective. What it is needed now is new platform creation tools, monitoring and profiling infrastructure, better runtime management systems, static and dynamic workload partitioning, just to name a few possible areas of research. This module is concluding this course but posing interesting questions towards possible future research directions that may also point the students to other Coursera courses on FPGAs.

What's included

1 video4 readings1 assignment

Instructor

Marco Domenico Santambrogio
Politecnico di Milano
5 Courses22,364 learners

Offered by

Recommended if you're interested in Design and Product

Why people choose Coursera for their career

Felipe M.
Learner since 2018
"To be able to take courses at my own pace and rhythm has been an amazing experience. I can learn whenever it fits my schedule and mood."
Jennifer J.
Learner since 2020
"I directly applied the concepts and skills I learned from my courses to an exciting new project at work."
Larry W.
Learner since 2021
"When I need courses on topics that my university doesn't offer, Coursera is one of the best places to go."
Chaitanya A.
"Learning isn't just about being better at your job: it's so much more than that. Coursera allows me to learn without limits."

New to Design and Product? Start here.

Placeholder

Open new doors with Coursera Plus

Unlimited access to 10,000+ world-class courses, hands-on projects, and job-ready certificate programs - all included in your subscription

Advance your career with an online degree

Earn a degree from world-class universities - 100% online

Join over 3,400 global companies that choose Coursera for Business

Upskill your employees to excel in the digital economy

Frequently asked questions